Table of Contents
Advertisement
AXIS 223M - Event Configuration
36
Object size, history and sensitivity:
Object Size
High level
Only very large objects
trigger motion detection
Low level
Even very small objects
trigger motion detection
Default value
Low
Examples:
•
Avoid triggering on small objects in the video image by setting the Object Size level to high.
•
To reduce the number of triggers if there is a lot of movement during a short period of time, select a high
History level.
To only detect flashing light, low Sensitivity can be selected. In other cases, a high Sensitivity level is
•
recommended.
Port Status
Under Event Configuration > Port Status there is a list showing the status for the camera's
input and output. This is for the benefit of Operators, who cannot access the System
Options section.
Example:
If the Normal state for a door push button connected to an input is set to Open circuit - as long as the
button is not pushed, the state will be inactive. If the doorbell button is pushed, the state of the input
changes to active.
History
An object that appears in the region will trigger
the motion detection for a long period
An object that appears in the region will trigger
motion detection for only a very short period
Medium to High
Sensitivity
Ordinary colored objects on ordinary back-
grounds will trigger the motion detection
Only very bright objects on a dark back-
ground will trigger motion detection
Medium to High
Advertisement
Table of Contents
