Port Status - Axis 213 User Manual

Scheduled Event
A Scheduled event can be activated at pre-set times, in a repeating pattern on
selected weekdays.
How to set up a scheduled event
This example describes how to set the AXIS 213 to send an email notification with
saved images from a set time:
1. Click Add scheduled on the Event types page.
2. Enter a descriptive name for the event, e.g. Scheduled email.
3. Set the Priority (High, Normal or Low).
4. Set the Activation Time parameters (24h clock) when the event is to be active,
e.g. start on Fridays at 18.00 with a duration of 62 hours.
5. Set the When Activated... parameters i.e. set what the AXIS 213 is to do at the
specified time e.g. send uploaded images to an email address.
6. Click OK to save the Event in the Event Types list.
Please use the online help files

Port Status

Under Event Configuration > Port Status there is a list that shows the status for the
connected inputs and outputs of the AXIS 213 for the benefit of the Operator who
cannot access the System Options section.
Example:
If the Normal state for a push button connected to an input is set to Open circuit - as long as
the button is not pushed, the state is inactive. If the button is pushed, the state of the input changes
to active.
AXIS 213 - Event Configuration
for descriptions of each available option.
39