Outputs Tab - THOMSON Amethyst III User Manual

Outputs Tab

Amethyst III DTV Smart Switch
User Manual
Chapter 3 'Web Browser Interface' — Interface Description
FEC can also be enabled through the front panel or the SNMP interface.
When the FEC has been deactivated:
 FEC correction: the FEC sessions are not taken into account and no
FEC correction is performed.

FEC generation: no FEC packet generation using FEC information is
performed.
The Outputs tab is used to:
 Display the outputs status
 View the output source
 Configure the monitoring outputs
 Check which physical GigE Ethernet interfaces are effectively linked to
a TS over IP interface (IP platform)
Figure 3-97. Outputs tab
ASI switches
IP switches
The Outputs tab displays a list of all outputs with an indication of the
content that is broadcast and also the main and backup IP destinations
(when applicable).
165