Specifications - Universal Audio OX Operation Manual

Specifications

Note: All OX Amp Top Box specifications are subject to change without notice.
SYSTEM
I/O Complement
Amplifier Input
Speaker Output
Line Outputs
Headphone Output
Digital Outputs
ANALOG I/O
Amplifier Input
Connector Type
Input Impedance
Maximum Input Power
Safety Load (power off)
Speaker Output
Connector Type
Output Attenuation
Output Latency
Line Outputs 1 – 2
Connector Type
Dynamic Range
Frequency Response
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Channel Separation
Output Impedance
Maximum Output Level
Output Latency
Stereo Headphone Outputs
Connector Type
Dynamic Range
Frequency Response
Signal-to-Noise Ratio
Total Harmonic Distortion + Noise
Maximum Output Power
Output Latency
OX Amp Top Box
One
One
Two (one stereo left/right)
One (stereo left/right)
Two (mirrored)
¼" Female TS Unbalanced
4/8/16 Ohms (selectable)
150 Watts RMS, 200 Watts RMS peak
16 Ohms
¼" Female TS Unbalanced
Five Attenuation Steps and Speaker Off
None (pure analog)
¼" Female TRS Balanced
114.5 dB (A-weighted)
20 Hz – 20 kHz, ±0.1 dB
114.0 dB (A-weighted)
-110 dB @ -3 dBFS
129 dB
100 Ohms
20.2 dBu (balanced)
2.77 milliseconds (122 samples @ 44.1 kHz)
¼" Female TRS Stereo
113.0 dB (A-weighted)
20 Hz – 20 kHz, ±0.1 dB
113.0 dB (A-weighted)
-107 dB @ -3 dBFS
80 milliwatts into 600 Ohms
2.77 milliseconds (122 samples @ 44.1 kHz)
(continued)
55 Specifications