Ox Registration; Ox Registration Overview - Universal Audio OX Operation Manual

OX Registration

To enable the OX app, the OX hardware needs to be registered with Universal Audio, and
the OX hardware must be connected to the internet via Wi-Fi to register. After registration
is complete, the OX app can access and control all available OX settings. This chapter
will guide you through the Wi-Fi and registration process.
Note: The OX registration process needs to be completed only once.
During registration, you'll use the OX app to control OX's network settings and connect
OX to an external Wi-Fi network. Registration occurs automatically when the OX hardware
and the OX app are both connected to the external Wi-Fi network at the same time.
Note: The existing external Wi-Fi network must be connected to the internet to
complete registration.

OX Registration Overview

To register OX, you'll follow the steps below. Complete details for each step are provided
in the OX Registration Procedure
1. From the Mac or iPad, download and open the OX app.
2. Pair the device that will run the OX app with OX's Wi-Fi hotspot.
3. Connect OX to an external Wi-Fi network that is connected to the internet.
4. Pair the OX app device to the same external Wi-Fi network as OX.
5. Open the OX app and complete registration. The app guides you through creating
your UA account, then OX registration is completed automatically through its
internet connection.
OX Amp Top Box
on the next page.
51 OX Registration