Getting Started; Installing Hard Drive - Q-See QT428 User Manual

GETTING STARTED

2. GETTING STARTED
Check the unit and the accessories immediately after opening your system.
Please disconnect the power before connecting to other devices.

2.1 Installing Hard Drive

This device supports one SATA hard drive up to 2TB.
Calculate HDD capacity according to the recording settings. Please refer to "Appendix B Calculate Recording
Capacity".
Step 1: Unscrew and Open the top cover
Step 2: Connect the power and data cables. Place the HDD onto the bottom case as shown below.
Step 3: Screw in the HDD as shown below.
Note: For easier installation, please connect the power and data cables first, and then screw the HDD to
base.
Fig 0.1 Connect HDD
Fig 0.2 Screw in the HDD
8 | P a g e
QT428 User Manual