Host Monitor; Spot - Q-See QT428 User Manual

MAIN MENU SETUP GUIDE
QT428 User Manual

4.2.2 Host Monitor

Step 1: Enter into system configurationlive configurationhost monitor; refer to Fig 4-8:
Fig 4-8 Live Configuration-Host Monitor
Step 2: Select split mode: 1×1, 2×2, 2×3, 3×3, 4×4 and channel
Step 3: Dwell time: the time interval for a certain picture display before switching to next picture display
Step 4: Select the split mode, then setup current picture group. Click button to setup the previous channel groups
of pictures, click button to set latter channel groups of pictures.
Step 5: Click "default" button to restore default settings; click "apply" button to save the settings; click "exit" button to
exit current interface.
NOTE: If you have dual monitors Host monitor needs to be main monitor.

4.2.3 SPOT

Step 1: Enter into system configurationlive configurationSPOT; refer to Fig 4-9:
Fig 4-9 Live Configuration-SPOT
Step 2: Select split mode: 1×1 and channel
21 | P a g e