Q-See QSC26404 User Manual page 78

3. Select "Users/rights" under the "Security" menu item. The following dialog box will be
displayed.
4. Create new user. Click "new user'. New user dialog box is displayed. Input user name
"target". Click "OK".
5. In the password dialog box input password "target" in "New Password" and "Verify
Password" edit box. Click "OK" to save and exit the dialog box.
6. In the "User/Rights Security" Dialog box select "User Name" as "target". In "Home
Directory" edit box, input the path where the firmware file (digicap) is placed. Then press "Done"
to exit.
QSC26404 User's Manual
Fig 7.2 setup parameters
Fig 7.3 Setup username
Fig 7.4 username
Fig 7.8 Password
78