Q-See QSC26404 User Manual page 48

Step 4: Setup alarm schedule: You can setup a working schedule. The DVR will only
respond when the video loss occurs during the schedule.
Note: The 4 time periods can not be repeated. Please reboot the DVR to make parameters
effective.
Step 5: Setup alarm policy: You can select one or more response options, including "On
Screen Warning", "Audible Warning", "Upload to Center" and "Trigger Alarm Output". You can
use 【↑】 【↓】and 【EDIT】key to enable or disable them. "×" is disabled and "" is enabled.
Step 6: Save alarm setup: After your setup, press the "Confirm" button and return to
"Advanced setting" interface. Press "Confirm" button to save current camera parameters and
return to main menu.
Step 7: Save all cameras: If you want to setup other cameras, please repeat step 2 to step 6.
In "Camera" menu, press "Confirm" key to save all camera's parameters. Press "Cancel" button or
【ESC】key to abort.
QSC26404 User's Manual
Fig 5.16 Video signal loss handle setup
48