Preview Properties - Q-See QSC26404 User Manual

Step 9: Save motion alarm setup: Press "Confirm" button to return to "Image Setup" menu.
In the "Image Setup" menu, press "Confirm" button to save the current camera parameters.
Step 10: Save all cameras: You can repeat step 2 to step 8 to setup motion detection
parameters for other cameras. You can also copy the parameters of one camera to any other
cameras.
Note: Motion alarm area can not be copied.
If you want to disable motion alarm area and motion alarm policy, you just need to set the
motion alarm sensitivity to "Off".

5.11 Preview Properties

In the "Preview" menu, you can setup preview mode, screen switch time, enable or disable
audio preview and preview layout.
Step 1: Enter into "Preview" menu: In the main menu, move the "Active Frame" to
"Preview" icon and press【ENTER】, you willl enter into "preview" menu as shown in fig 5.19
QSC26404 User's Manual
Fig 5.19 Setup preview mode
52