Q-See QSC26404 User Manual page 68

Note: In the DVR "PTZ" menu, if you select Pelco-P protocol when you setup PTZ address
please plus or minus one compared with Camera ID. For example, if camera ID is 2, the DVR
PTZ address is set as ID 3.
Preset setup: Preset is using one number to represent the camera's position, zoom, focus and
iris. Move the "Active Frame" to "Setup" button on the right side of "Preset", press 【ENTER】 key
to enter into preset setup menu. You can save 128 preset numbers. Please make sure the PTZ
camera you are using supports the preset function before you setup preset.
Sequence setup: Each sequence is made up of several cruise points. Each cruise point
includes one preset number, dwell time and dwell speed. Please make sure the PTZ camera you
are using can support the sequence function before you start to setup. You can save 16 sequences.
Cruise setup: Cruise is remembering the track of PTZ movement. Please make sure the PTZ
camera you are using can support the cruise function.
Preset setup
In "PTZ" menu, move the "Active Frame" to "Setup" button on the right side of "Preset"
item, press【ENTER】, you can enter into "Preset" setup menu as shown in fig 5.30
QSC26404 User's Manual
Fig 5.30 PTZ preset setup
68