Camera Name And Osd (On Screen Display) Setup - Q-See QSC26404 User Manual

5.5 Camera name and OSD (On Screen Display) Setup

Camera Name
In "Camera" menu, you can input a name for each camera. See fig 5.9
Please note that a camera's name can not be copied.
The steps to setup camera name:
Step 1: Select a camera.
Step 2: Move "Active Frame" to camera name edit box, press 【 EDIT】 key to enter
into edit status, you can input digital number, uppercase and lowercase characters
(refer to Chapter 3.4). The camera name can support 32 characters.
Step 3: Press【ENTER】key to exit edit status.
Move "Active Frame" to "Confirm" button, press【ENTER】to save the change
and you can see the new camera name. Press "Cancel" button or【ESC】key to abort.
Camera Name Position
If you do not want to display a camera name, just disable the check box beside
camera name edit box. The disable flag is "×". If you enable the check box, you can
setup the camera name position. You can copy the position to any other camera. The
setup steps are:
QSC26404 User's Manual
Fig 5.9 Input camera number
40