JVC KS-JA0502-4 Instruction Manual page 12

4
Select the playback source.
Monitor
Each time you press the button, the playback source changes as follows:
DISC
• DISC: Selects the built-in DVD player.
• AV 1: Selects the external component connected to the AV1 INPUT terminals of the
monitor.
• AV 2: Selects the car AV unit.
5
Operate the playback source you selected.
To operate the built-in DVD player, see "Disc operations" on page 18.
To operate the external components, refer to the manuals for the connected components.
6
Adjust the volume on the car AV unit.
• When using the headphones, adjust its volume level (see page 10).
To turn off the power
Monitor only
To activate the door sensor
• OFF: Turns off the dome lights.
• DOOR: Activates the door sensor which turns on the dome lights when a door is open.
• ON: Turns on the dome lights.
12
MODE
Remote controller
AV 1 AV 2
• When using the headphones, turn off the power after turning off the
headphones.
• When shipped from the factory, "POWER OFF MODE" of the
monitor menu is set to "20 min." (see page 14). With this setting,
you can keep the monitor turned on for 20 minutes after switching
off the ignition of the car.