More About This Monitor - JVC KS-JA0502-4 Instruction Manual

More about this monitor

Disc operations
General
• In this manual, words "track" and "file" are
interchangeably used.
• This unit can only playback audio CD (CD-
DA) files if different type of files are recorded
in the same disc.
– The first track will be skipped if a different
type of file is detected first.
• When a disc has been loaded, selecting
"DISC" for the playback source starts disc
play.
• It does not start disc playback automatically
to turn on the power again after turning off
the power while playing back a disc. Pressing
(or 3 on the remote controller) starts
playback from where it stopped.
Starting playback
• When no disc is inserted, "NO DISC" appears
on the screen.
• When a disc is inserted upside down, "CAN
NOT PLAY THIS DISC" appears on the
screen, then the disc will automatically eject.
• You can play a disc even if the monitor is
closed.
Basic operations
• No sound comes out during Slow Motion
Playback.
• When playing a VCD, Reverse Slow Motion
Playback is prohibited.
• One Touch Replay works only within the
same title. (For some DVDs, this function
does not work.)
• When playing a DVD/VCD, no sound comes
out during Search.
• Reverse search stops automatically when it
reaches the beginning of the disc. Playback
resumes at normal speed.
Unique disc functions
• While zoomed in, the picture may look
coarse.
Playing Recordable/Rewritable discs
• This unit can recognize a total of 3 500 files
and 250 folders (a maximum of 999 files per
folder).
• Use only "finalized" discs.
• This unit can recognize a total of 25
characters for file/folder names.
• Only for CD-R/CD-RW: This unit can play
back multi-session discs; however, unclosed
sessions will be skipped while playing.
• It is possible to play back finalized +R/+RW
(Video format only) discs. However the use
of +R double layer disc is not recommended.
• DVD-R recorded in multi-border format is
also playable (except for dual layer discs).
• Some Recordable/Rewritable discs may not
play back on this unit because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– Discs on which the files are written with
"Packet Write" method.
– Discs which are not written in UDF-Bridge
Format (e.g. UDF format or ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• Rewritable discs may require a longer readout
time.
• Do not use the following discs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.
Continued on the next page...
33