DCS Compact II INSTALLATION MANUAL
3.3 6TRK Card
6 loop start trunk ports and 2 PFT ports for power failure transfer. (See Figure 3-1)
3.4 8SLI Card
which has 8 subscribe line ports (See Figure 3-2)
There are no options on this card. Insert as many 6TRK cards as are needed into
any universal slots 1 to 6. Push firmly in the middle of both card ejectors on each
card to ensure that it is fully inserted into the back plane connector.
There are no options on this card. Insert as many 8SLI cards as are needed into
any universal slots 1 to 6. Push firmly in the middle of both card ejectors on each
card to ensure that it is fully inserted into the back plane connector.
<FIGURE 3-2> 8SLI CARD AND 2SLI CARD1
Chapter 3. Installing Printed Circuit Cards
3 - 3