Battery For Power Failure - Samsung DCS-Compact II Installation Manual

DCS Compact II INSTALLATION MANUAL

2.8 Battery for Power Failure

Battery Selection
Install Procedure
You can continue to use the DCS Compact II system during a power failure if you
have installed an appropriate battery. If you use a battery whose capacity is too
large or too small, however, the system may not operate correctly (see
specification below). Use the battery connection cable supplied with the system.
First, pick out the cable through the MDF cable path. Then connect the cable to
the battery RED to positive(+) and BLACK to negative(-). Next, connect the
housing connector to the head pin in the power supply. (See Figure 2-8)
<FIGURE 2-8> CABLING FOR BATTERY CONNECTION
Chapter 2. Installing Basic KSU and Expansion Cabinet
2 - 1 0