DCS Compact II INSTALLATION MANUAL
Chapter 2. Installing Basic KSU and Expansion Cabinet
2.3 Basic KSU Installation
The Basic KSU, which is to be accommodated in the metal cabinet, can be wall
mounted or floor mounted. If wall mounted, the KSU should be mounted on a
plywood backboard at least 15mm thick. Attach the two mounting screws to the
backboard. Hang the KSU on the two screws by its mounting holes and secure it
to the backboard with the remaining two screws. (See Figure 2–1)
<FIGURE 2-1> BASIC KSU(KEY SERVICE UNIT)
2 - 3