Wolf L SERIES Use And Care Manual page 9

O VEN O P E RAT I ON
Oven Operation
C L O C K
The clock is visible on the control panel during all cooking
modes, except when the timer is in use. It is very important
the clock is set to the correct time if a timed cook feature is
used. The clock must be reset after a power outage.
Setting clock:
Touch CLOCK on the control panel.
1
Touch number pads to set time of day.
2
Touch ENTER. An audible chime indicates clock has
3
been set.
To change from a 12- to 24-hour clock, once clock is
4
set, touch TEMPERATURE for 3 seconds, touch CLOCK,
then touch ENTER.
T I M E R
The timer can be set for a maximum of 9 hours, 59 minutes.
Once a time is set, the countdown is illuminated on the con-
trol panel display. The last minute counts down in seconds.
When complete, the oven will chime and time will flash. The
timer will continue to chime every 10 seconds until CLEAR
is touched. The timer is independent from the oven. Setting
the timer does not affect cook time or stop time. For infor-
mation regarding auto program features, refer to page 12.
Setting timer:
Touch TIMER on the control panel.
1
Touch number pads to set time in hours and minutes.
2
Touch ENTER. An audible chime indicates timer has
3
been set.
TEM PER ATU R E SC AL E
The oven can display temperature in Fahrenheit (°F) or
Celsius (°C).
Setting temperature scale:
While oven is off, touch and hold TEMPERATURE on the
1
control panel for 5 seconds.
Touch COOK TIME to select F° or C°.
2
Touch ENTER.
3
|
wolfappliance.com 9