Quality Verification - Gako Unguator e/s Operating Instructions Manual

Fig. 1-16: AirDynamic

1.4 Quality Verification

The production site for all UNGUATOR
EN ISO 9001. Periodic quality controls not only guarantee the outstanding but also
most notably the lasting quality of the UNGUATOR
• UNGUATOR
and the UNGUATOR
• The head of the UNGUATOR
the mixing blades of the UNGUATOR
• The shaft of the UNGUATOR
and hardened through titan nitration (gold-colored).
• The materials and pigments deployed are physiologically safe.
• All priceable UNGUATOR
Applicator and Varionozzle) can be found under UNGUATOR
designations start with UNGUATOR
(a database of approx. 340.000 medicines and other pharmaceutical products).
18
®
System
® Applicators, couplings and jars are made of polypropylene (PP)
®
Varionozzles of polyethylene (PE),
®
®
® line products (UNGUATOR
System, even thick pastes can be
dispensed via the small dispensing
opening in the screw cap or trans-
ferred to small UNGUATOR
using the UNGUATOR
The material outlet velocity depends
on viscosity which may be reduced
through heating.
The air pressure that had developed
in the lower chamber of the UNGU-
®
ATOR Jar can be relieved by open-
ing the valve screw. This is manda-
tory after the transfer process using
the UNGUATOR
the smaller UNGUATOR
removed. Otherwise this may result
in considerable contamination of the
immediate environment, depending
on formulation viscosity.
®
products is certified in accordance with DIN
®
Mixing System.
SMB is made of polyoxymethylene (POM) and
®
Disp. Blade of polyamide (PA).
MB is made of stainless steel (quality: 1.4301)
®
in the EPDS and the German "Hilfstaxe"
UNGUATOR
® Jars
®
Coupling.
®
Coupling before
®
Jar is
® Jar, Disp. Blade,
®
... since the
®
Mixing System