Airdynamic System - Gako Unguator e/s Operating Instructions Manual

The 200 ml UNGUATOR
comes a convenient transfer device
to smaller UNGUATOR
their UNGUATOR ® Jar bottoms are
carefully pressed towards the work
surface using an UNGUATOR
applicator screwed on a 30 ml
®
UNGUATOR Jar.
In addition to the UNGUATOR
Coupling, required for transfer from
a from a 300 ml or 500 ml UNGU-
®
ATOR Jar into a smaller UNGU-
®
ATOR Jar, both the UNGUATOR
spindle and the AirDynamic
may also be used. Dispensing and
transferring a formulation via the dis-
pensing opening in the UNGU-
®
ATOR Jar Lid from the 1000 ml
®
UNGUATOR Jar is practically only
possible using the AirDynamic
tem.
We recommend transferring the formulation as soon after mixing as possible, since
the formulation has then hardly cooled and is still warm and less viscous.
1.3.7 AirDynamic
®
The AirDynamic System optimizes batch preparation within the closed system:
• contamination-free transfer
• contamination-free storage
®
The AirDynamic System has been designed to use UNGUATOR
1000 ml for dispensing mixtures. An adapter connected to a pump ball is affixed the
center hole on the housing bottom of the UNGUATOR
By pumping air into the lower chamber of the UNGUATOR
pressure thus generated moves the movable bottom upward. Thanks to the AirDynamic
®
UNGUATOR Mixing System
®
Jar be-
® Jars when
®
®
Fig. 1-15: UNGUATOR
®
®
System
®
Sys-
Fig. 1-14:
Transfer using a 200 ml UNGUATOR
®
System
®
Coupling
®
Jars from 300 ml to
®
Jar with an air-tight connection.
®
using the pump ball, the
®
Jar
®
17