Panasonic LUMIX DC-GH5S Owner's Manual page 85

[Zebra Pattern]
Indicates parts that may become white saturated through overexposure in a zebra pattern.
> [Custom] >
MENU
[ZEBRA1]
Select [SET] to set the brightness to be processed as a zebra pattern.
• You can select a brightness value between [50%] and [105%]. In [Zebra 2], you can select
[OFF]. If you select [100%] or [105%], only the areas that are already white saturated are
displayed in a zebra pattern. The smaller the value is, the wider the brightness range to be
processed as a zebra pattern will be.
• If there are any white saturated areas, we recommend compensating the exposure towards
negative (P37) referring to the histogram and then taking the picture.
• Displayed zebra patterns will not be recorded.
[Economy]
The camera can be set up to prevent unnecessary battery consumption.
> [Setup] > [Economy]
MENU
[Sleep Mode]
[Sleep
Mode(Wi-Fi)]
[Auto LVF/
Monitor Off]
[Power Save LVF
Shooting]
• To wake the camera from [Sleep Mode], [Sleep Mode(Wi-Fi)] or [Power Save LVF Shooting],
press the shutter button halfway or turn the camera off and on.
• To turn the monitor/viewfinder on again, press any button.
[Night Mode]
This displays the monitor and viewfinder screens in red. It reduces the difficulty in seeing
the surroundings caused by brightly-lit screens at night or in any low-light environment.
> [Setup] > [Night Mode]
MENU
1 Press 3/4/2/1 to select [ON] for the red display setting of the monitor or viewfinder
(LVF).
[Monitor / Display] > [Zebra Pattern]
The camera is automatically turned off if the camera has not been used for
the time selected on the setting.
The camera is automatically turned off if it is not connected to a Wi-Fi
network and has not been used for 15 minutes (approx.).
The monitor/viewfinder is automatically turned off if the camera has not
been used for the time selected on the setting.
If you display the monitor using the viewfinder/monitor automatic switching
function, the camera will turn off automatically after being left idle.
Sets the amount of time before the camera turns off
[Time]
automatically.
Sets whether to turn off the camera automatically only while the
[Display] [Monitor Info. Disp.] screen is displayed or while any screen is
displayed.
[ZEBRA2]
Menu
85
(ENG) DVQX1356