Panasonic LUMIX DC-GH5S Owner's Manual page 66

Recording
Reducing flickering and horizontal stripes on images ([Synchro Scan])
• This function is available when [Exposure Mode] is set to either [S] or [M] in Creative
Video Mode.
1
Select the menu.
>
MENU
2
Select Shutter Speed with 2/1, and then press [MENU/SET].
• Adjust the shutter speed while looking at the screen so that flickering and horizontal
stripes will be minimized.
• If you press and hold 2/1, the shutter speed will be adjusted faster.
• You can also adjust the shutter speed setting on the recording screen in increments finer
than the normal adjustment method.
Moving the focus position smoothly to a registered position ([Focus
Transition])
1
Set the mode dial to [
2
Select the menu.
>
MENU
[POS 1]/[POS 2]/[POS 3]
3
Press [ ].
4
Press 3/4/2/1 to select the focus position and then press [MENU/SET].
5
Set the focus position.
• This is the same operation as Manual Focus operation. (P36)
6
Press [MENU/SET].
• To register focus positions to other items, repeat steps
• Set the items below as needed.
[Focus Transition Speed] Sets the moving speed of focus.
[Focus Transition Rec]
[Focus Transition Wait]
7
Press 3/4 to select [Start] and then press [MENU/SET].
• To return to the setting screen, press [DISP.].
8
Press the motion picture button (or shutter button) to
start recording.
• If you have enabled [Focus Transition Rec], Focus
Transition will start when you start recording a motion
picture.
66
DVQX1356 (ENG)
[Creative Video] > [Synchro Scan] > [ON]
].
[Creative Video] > [Focus Transition] > [Focus Pull Setting] >
Starts Focus Transition when recording starts.
Sets the wait time before the start of Focus Transition.
2 6
through .
POS 1 POS 2
POS 1
POS 3