Panasonic LUMIX DC-GH5S Owner's Manual page 103

2
Select [New connection].
3
Connect to the wireless access point.
• To connect with [WPS (Push-Button)], refer to the procedure in "Select the connection
method." on P107. For details about connection to a wireless access point, refer to the
"Owner's Manual for advanced features (PDF format)".
• A wireless access point will be registered automatically after the camera connects to it via
Wi-Fi.
∫ Setting up "LUMIX CLUB" (Setup 2)
Preparations:
• Create an account for the Cloud Storage you want to use, and have the login information
available.
• Register to "LUMIX CLUB".
Register to "LUMIX CLUB" in the camera's menu item below.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > [LUMIX CLUB] > [Set/Add Account] >
MENU
[New account]
You can also use the login ID registered with your PC or smartphone for the camera.
For details, refer to the "Owner's Manual for advanced features (PDF format)".
1
Connect to the "LUMIX CLUB" site using a smartphone or computer.
https://lumixclub.panasonic.net/eng/c/
2
Enter your "LUMIX CLUB" login ID and password and log in to the service.
• If you are required to register an email address, operate following the on-screen
instructions.
3
Select and register the cloud storage service you want to use in Cloud Storage
Link Settings in Web service link settings.
• Operate following the on-screen instructions.
∫ Setting up "Image App " (Setup 3)
1
Make a Bluetooth connection to the smartphone. (P93)
2
Operate the smartphone.
1 Select [
2 Select [Bluetooth].
3 Select [
4 Enable Automatic Backup, and set backup settings.
• Below are the required backup settings. In addition to these settings, configure other
settings as necessary.
– Connection information of wireless access point (SSID): Select the wireless access
point registered in (Setup 1).
– Cloud setting: Enter the login ID and password for the "LUMIX CLUB" used in (Setup
2), and select the cloud storage service you want to use in Upload destination.
• You can try a connection test. Turn on the camera and run the test when the camera is
not connected to a Wi-Fi network. If the camera is connected to a Wi-Fi network,
follow steps
Wi-Fi connection of the camera.
].
] for the connected camera.
1 2
and of "Terminating the Wi-Fi connection" on P97 to terminate the
Wi-Fi/Bluetooth
103
(ENG) DVQX1356