Advertisement

The Yaasa
Adjustable Bed
Owner's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Yaasa Adjustable Bed

  • Page 1 The Yaasa Adjustable Bed Owner’s Manual...
  • Page 2: Table Of Contents

    No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Yaasa Studios Inc. All violations involving copyright may result in legal action. 2017 Yaasa Studios Inc.
  • Page 3 04 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 4 The Yaasa Adjustable Bed may solely be used for the intended use according to this documentation. NOTICE The Yaasa Adjustable Bed is an electrically controlled bed base. It is operated by a remote control. Additionally, it contains one USB module on each side to charge mobile devices such as smart phones or tablet PCs.
  • Page 5 Instructions. Do not tilt the assembled bed upright to move it. WARNING Disconnect the power supply before connecting or disconnecting any components. Otherwise electrical hazards might arise. 08 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 6 Any change to the antenna or the device could result in the device exceed- ing the RF exposure requirements and void user’s authority to operate the device. 10 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 7: Introduction

    Thank you for choosing a product from Yaasa. No liability shall be assumed for defects or damage caused by any of the following reasons: With the Yaasa Adjustable bed you have a product that meets all safety requirements. ▪ Unintended use of the system.
  • Page 8: Box Contents

    Box Contents The Yaasa Adjustable Bed is delivered in two boxes with all functional components and tools to fully assemble and operate the system. Upon opening the packaging make sure all listed parts are included and in perfect condition. In an unlikely case of parts being damaged or PLATFORM ELEMENT (HEAD) missing please contact Yaasa (chapter 2 INTRODUCTION).
  • Page 9: Assembly

    Use the stickers on the parts to find the right position and orientation. The Yaasa Adjustable Bed is intended to be built by two adults. No additional tools or equipment is necessary. All needed tools are included. Make sure enough space is available to manipulate all parts during assembly.
  • Page 10 Then take out the Assembly Support. and turn the wheel clockwise. Tighten con- The arrow on the side rail indicates nector wheel hand tight. the correct direction. 18 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 11 Create a loose loop with the USB-cable (J) and run the cable through the designated channel. Place the 2 USB-modules outside of the frame. 20 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 12 Screw them in hand tight. over the power cable. Refer to the grounding instruc- tions for information about proper grounding. NOTICE Do not put strain on any cables. 22 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 13 Do not place the assembled bed flush against the wall to avoid damage to the bed and the wall. Keep a small distance. BEFORE USING YOUR YAASA ADJUSTABLE BED FOR THE FIRST TIME Your Yaasa Adjustable Bed is almost ready, pleasure follow these steps before using: • Put a mattress on the Yaasa Adjustabled Bed •...
  • Page 14: Disassembly And Transportation

    CAUTION DISASSEMBLY Do not grab the side rails by moving parts. Always grab them by the rigid frame. To disassemble Yaasa Adjustable Bed follow the actions of the assembly instructions in reverse CAUTION order. Do not tilt the assembled bed upright to move it.
  • Page 15: Operation

    Hold for three seconds to disable or enable the Child Lock. The remote control displaying an L when pressing any button will in- dicate that the child lock is activated. CAUTION Activate Child Lock when children are present. 28 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 16: Cleaning And Maintenance

    3. Unplug the power converter until the LED goes out and plug it back in. To clean any parts of Yaasa Adjustable Bed only use a dry or damp lint free cloth. Do not get any parts wet during cleaning.
  • Page 17 15 seconds. The remote control displays “F” to confirm the input. Then the bed will move into the flat position and re- sets the drive position. 32 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 18: Technical Data

    Most components of this product are recyclable. Please protect our environ- ment for future generations and dispose responsibility. Consult local authorities regarding local laws, regulations and resources for responsible and proper disposal of this product. 34 // YAASA ADJUSTABLE BED OWNER‘S MANUAL YAASA ADJUSTABLE BED OWNER‘S MANUAL //...
  • Page 19 FOR ADDITIONAL ASSISTANCE Please contact Yaasa Studios: Phone: 855-622-3711 E-Mail: info@yaasastudios.com Or visit help.yaasa.com 36 // YAASA ADJUSTABLE BED OWNER‘S MANUAL...

Table of Contents