Yaasa Adjustable Bed Owner's Manual page 6

DANGER
Do not open any electrical parts under any circumstances. This could lead to serious injury or death.
DANGER
Do not modify any components of the bed.
DANGER
Do not operate the bed in a potentially explosive atmosphere.
WARNING
To disconnect bring the bed into the flat position, then remove plug from outlet.
WARNING
Risk of injury: keep children away from the moving platforms.
WARNING
Risk of electric shock: connect the power plug to a properly grounded outlet only. See ground-
ing instructions.
SAVE THESE INSTRUCTIONS
10 // YAASA ADJUSTABLE BED OWNER'S MANUAL
ELECTRICAL GROUNDING
GROUNDING INSTRUCTIONS
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in sketch A (see below). A temporary adapter that looks like the adapter illustrated
in sketches B and C can be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter should be used only un-
til a properly grounded outlet (sketch A) can be installed by a qualified electrician. The rigid ear,
lug, or the like extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by
a metal screw.
FCC statement:
Radio Frequency is 2.4 GHz
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceed-
ing the RF exposure requirements and void user's authority to operate the device.
YAASA ADJUSTABLE BED OWNER'S MANUAL // 11