Proflex RX680 User Manual page 7

RX680 Rowing Machine
Folding / Unfolding
To fold:
1. Remove (rotate left) the lock knob (A).
2. Pull the locking pin (B) from the rail.
3. Rotate the end of the rail up to the folded
position. The front of the damper unit will now
rest on the storage foot (C).
4. Re-insert the locking pin through the rail and the
folded position hole (D) in the rail.
To unfold, hold the rail, then remove the locking pin,
and gently lower the rail to the floor. Re-insert the
locking pin through the damper unit and rails, then
firmly screw in (rotate right) the lock knob.
Always set-up the equipment on a flat and level surface.
Moving
The unit can be tilted onto its wheels for easy moving. With the
equipment in the folded and locked position, firmly grasp the rail with
both hands. Next, carefully tilt the equipment back until it rolls freely.
Do not attempt to move the equipment while it is in the
unfolded position.
E&OE
C
© 2017 Proflex
A
B
D
7