Assembly - Proflex RX680 User Manual

RX680 Rowing Machine

Assembly

1. Turn the damper unit (A) upside-down, and install the damper unit foot (B) (with wheels facing out) to
the underside. Secure the foot using 2 M8x50 screws (C). Firmly tighten (rotate right) the fasteners
using the Allen key.
A
2. Use the screwdriver to remove (rotate left) the 2 screws securing the buffer (D) to the underside of the
rail (E), and remove the buffer – this makes it easier to install the seat. Then, slide the seat (F) onto the
rail, so the rail sits between the 3 sets of rollers under the seat. Ensure that the seat faces forwards and
is on the correct side of the rail (see pictures). Move the seat past the previously removed buffer, then
re-install the buffer.
D
E
3. Install the rail foot (G) to the end of the rail (E). Ensure that the foot is angling away from the rail – this
improves stability. Secure the foot using 4 M8x15 screws (H), washers (I) and spring washers (J). Firmly
tighten (rotate right) the fasteners using the Allen key.
E
8
4. Install the storage foot (K) to the underside of
the damper unit (A) (where the rail connects).
Secure the storage foot using 2 M8x15
screws (H) and washers (I). Firmly tighten the
screws (rotate right) using the Allen key.
E&OE
B
G
I H
J
A
8
© 2017 Proflex
C
F
D
I H
5