Raymarine mn100 User Manual page 18

mn100 Dual Digital Display
P29 Timer
Countdown or elapsed time stopwatch.
Press and hold for 1 second the
buttons to set the required countdown time in minutes.
Press the
Press the
The display will sound a single beep each 60 seconds until 1 minute
remains when a beep will sound at 10 second intervals. The final 10
seconds will count down with a beep each second with "START" being
indicated by a triple quick beep at 0. The timer will automatically start to
count the elapsed time and this will continue until the
pressed and held for one second.
At any stage a quick press of the
to the nearest full minute and then carry on the count down.
Example:
Press and hold for 1
second to enter the
Press to start
16
button quicklyto prepare to start the countdown.
button quickly to start the countdown.
Press at 3mins 24secs the timer will reset to 3mins 0 secs
Press at 7mins 52secs the timer will reset to 8mins 0 secs
timer setup
button and use the
button will resynchronise the timer
Select the desired
countdown time
Countdown time in
progress
and
button is
Press and hold for 1
second to store the
countdown time
Press to
resynchronise
to nearest full minute
(8:00)