Setup - Kodak Pocket Portable Projector User Manual

5. SETUP

1. Charge the Projector
A. Connect the adapter to the micro USB port of the projector, using the included power cord.
B. Plug the adapter into an outlet or other
power source.
C. You may now use the projector.
D. While plugged in, the projector's battery will
automatically charge. It is recommended that
you allow the projector to charge for at
least 4 hours before using it in battery
mode for the first time.
AC Power Cord Requirements
Ensure that the correct AC plug type is used, according to your location. If the power cord included
with your projector does not match your local power source, contact your sales dealer.
NOTE: It is recommended that your video source device uses a grounded plug. This will prevent signal
interference from voltage fluctuations.
Australia and
Mainland China
2. Connect an External Device to the Projector
A. Turn on the Projector
Press and hold the power button for 5 seconds
to turn on the projector.
B. Adjust the Focus Wheel
Open a still image and carefully rotate the
focus wheel until the image is clear.
6
USA, Canada, Continental
and Taiwan
UK
Europe
Japan
B
Sweden
A