Package Contents; Requirements Tools And Information - Cisco 3504 Installation Manual

Installing the Cisco 3504 Wireless Controller
Procedure
Step 1 Remove the controller from its container and save all the packaging material.
Step 2 Compare the shipment to the equipment list provided by your Cisco customer service representative. Verify
that you have all the items.
Step 3 Check for damage and report discrepancies or damage, if any, to your Cisco customer service representative.
Before speaking to the representative, have the following information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation

Package Contents

Each Cisco 3504 Wireless Controller package contains the following items:
• One Cisco 3504 Wireless Controller
• One Power supply and power cord (power cord option configurable)
• Optional licenses will be pre-installed on controller at factory, if selected
• Cisco 3504 Wireless Controller software pre-loaded on the controller (software option configurable)
• Two Number 6 Phillips pan-head screws for mounting the controller on a desk, shelf, or wall
• Two wall anchors
• Four adhesive rubber feet pieces

Requirements Tools and Information

You will need the following tools and information before you can install the controller:
• Wireless controller hardware
• Command-line interface (CLI) console
◦ Controller with factory-supplied power cord and mounting hardware
◦ Network, operating system service network, and access point cables as required
◦ Serial terminal emulator on CLI console (PC or laptop)
◦ Mini-B USB console port
◦ Use either RJ-45 console cable or Mini-B USB cable to connect CLI console and controller
Cisco 3504 Wireless Controller Installation Guide
Package Contents
9