Texas Instruments TI-Nspire CX Manual Book page 9

The TI-Nspire™ Docking Station has 10 slots and each slot can accommodate either a
TI-Nspire™ CX Handheld or a TI-Nspire™ handheld. You can also seat a TI-Nspire™
handheld with a slide case on the front of the handheld in the TI-Nspire™ Docking
Station.
The TI-Nspire™ CX Docking Station also has 10 slots; however, this docking station was
designed specifically for the TI-Nspire™ CX Handheld. You cannot seat TI-Nspire™
handhelds in the CX docking station.
The LED indicators on the front of the docking stations provide information about the
battery status, transfer status and indicate whether the handheld is properly seated.
Ÿ ) Transfer Status LED Indicator
(
Battery Status LED Indicator
Indentations on each side of the docking stations enable you to lift a docking station
using both hands.
Turn the docking stations over and you will notice an indentation or "channel" across
the bottom. To ensure the docking stations sit flat on a surface, thread the cable
through this space when you are configuring multiple docking stations end-to-end. You
TI-Nspire™ Docking Stations 9