Texas Instruments TI-Nspire CX Manual Book page 15

computer via a USB cable plugged into an available USB port. Multiple docking stations
are linked together with USB cables.
Supported Files Types
You can transfer the following types of files to connected handhelds:
File Type
TI-Nspire™ document
Packaged lesson bundle file
Handheld operating system files
TI-Nspire™ CX Handheld
TI-Nspire™ CX CAS Handheld
TI-Nspire™ Handheld
TI-Nspire™ CAS Handheld
Using the Transfer Tool, you can select to transfer files to all connected handhelds or
transfer files to selected handhelds in the docking station.
Transferring Files and Folders to Handhelds
Use the Transfer Tool, to select folders or files stored on your computer and transfer
them to handhelds in the TI-Nspire™ Docking Stations. Once a transfer starts, it
continues until you stop it. You cannot select additional files until the transfer is
complete or until you stop the transfer.
You can remove a handheld from a docking station when the associated Transfer
Status LED indicator shows that the transfer is complete. You can place another
handheld in the empty slot and files will also be transferred to that handheld unless
you stop the transfer.
Extension
.tns
.tilb
.tco
.tcc
.tno
.tnc
TI-Nspire™ Docking Stations 15