Transferring Files And Folders - Texas Instruments TI-Nspire CX Manual Book

• Red indicates battery is low with less than 25 percent power
• Yellow indicates battery power is between 25 and 75 percent
• Green indicates battery power is greater than 75 percent
• The light is off when:
- The slot is empty.
- The handheld is not seated correctly.
- The docking station is not connected to a power source.
Learning More about Battery Status
Additional information is available in the Content Workspace if using TI-Nspire™
Teacher Software, TI-Nspire™ CAS Teacher Software or TI-Nspire™ Navigator™ Teacher
Software. You can view the status of both the TI-Nspire™ Rechargeable Batteries and
the AAA batteries in connected handhelds.
For both rechargeable batteries and AAA batteries, status levels are reported as they
are on the handheld:
• Critical, low (two to ten percent), 25, 50, 75 or 100 percent charged.
• Percentages are presented in black text unless the level is critical. Red text
indicates the battery power is critically low.
• Two dashes (--) indicate the handheld does not have a rechargeable battery or AAA
batteries installed.
Troubleshooting
If the recharge fails:
• Make sure the handheld is seated properly in the slot. Batteries are not charged if
the connector on the handheld and the connector in the slot are not aligned.
• Check the connector on the handheld to ensure that it is clean. If there is build-up
on the handheld's connector, you can remove it with a clean, dry cloth or a pencil
eraser. Never use wet cloths or solutions of any kind.

Transferring Files and Folders

Teachers can use the Transfer Tool function available in the TI-Nspire™ CX Teacher
Software, TI-Nspire™ CX CAS Teacher Software or TI-Nspire™ CX Navigator™ Teacher
Software to reload connected handhelds in multiple docking stations with a common
set of folders and files or upgrade the OS on handhelds with an existing operating
system.
To transfer content to or from connected TI-Nspire™ CX handhelds, you must have OS
version 3.0 or higher installed on all the handhelds.
Viewing Status and Settings
Teachers can also the view status and settings of connected handhelds. When using
the Transfer Tool, one of the docking stations must be connected to the teacher's
14 TI-Nspire™ Docking Stations