Advertisement
DEBRIS NET CLEANING
1.
Make sure the filter pump is turned off, and disconnect the power cord
from the electrical outlet. Remove the auto cleaner from the pool.
2.
Unlock four buckles located on the four sides. See Fig. 10.
3.
Remove the debris net (4) from the cleaner base (5). If debris is on the
debris net and cleaner base, use garden hose to flush the debris off.
Use the brush if necessary. See Fig. 11.
4
5
4.
Reassemble auto cleaner reversing steps 1, 2 and 3.
LONG TERM STORAGE
1.
Make sure the filter pump is turned off, and disconnect the power cord
from the electrical outlet.
2.
Using the Set Up instructions in reverse, disassemble the auto cleaner.
3.
Clean and air dry all the accessories and parts thoroughly.
4.
Keep the hoses straight during storage.
5.
Remove the brushes and keep them flat and straight during storage.
6.
The original packaging can be used for storage. Store in a dry, cool
storage location.
S AVE THESE INSTRUCTIONS
(100PO) AUTO CLEANER ENGLISH SIZE: 4.875" X 7.25" PANTONE 295U 07/26/2012
100
English
PO
10
11
Page 8
Advertisement
