Table of Contents
Advertisement
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5" X 10.3" PANTONE 295U 07/14/2017
Krystal Clear
& Saltwater System
Model ZS6220 & ZS6230
For illustrative purposes only.
Don't forget to try these other fine Intex products: Pools,
Pool Accessories, Inflatable Pools and In-Home Toys,
Airbeds and Boats available at fine retailers or visit our
website.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
©2017 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd.
- Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte
vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence
de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der
Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong
Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué
dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V.,
Venneveld 9, 4705 RR Roosendaal – The Netherlands
www.intexcorp.com
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
TM
English
328A
Ozone
328-*A*-R0-1807
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intex L ZS6220
Summary of Contents for Intex L ZS6220
- Page 1 Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal –...
-
Page 2: Table Of Contents
Product Information & Specifications........ 5 Setup Instructions..............6-7 Salt & Pool Water Volumes..........8 Intex Pools Salt Table............9 Intex Pools Cyanuric Acid Table......... 10 Intex Pools Operating Time Table........11 Non-Intex Pools Salt Table........... 12 Non-Intex Pools Cyanuric Acid Table......... 12 Non-Intex Pools Operating Time Table....... -
Page 3: Warnings
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING •... -
Page 4: Parts References
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. NOTE: Drawings for illustration purpose only. -
Page 5: Product Information & Specifications
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A HOW THE CHLORINE IS GENERATED This product is specially designed for above ground pools. It will destroy the bacteria, oxidize bather organics and control algae, which provide a safe, clean and comfortable swimming pool. Common salt (sodium chloride) is made up of two elements, sodium and chloride. -
Page 6: Setup Instructions
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A SETUP INSTRUCTIONS IMPORTANT • The Ozone & Saltwater System requires a separate filter pump [1500~4000 gph (5680~15140 lph)] to drive the water and function properly. •... - Page 7 (328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A SETUP INSTRUCTIONS (continued) Connecting the system to other types of pump (with different type of thread or no thread): The Ozone & Saltwater System can also be adapted to other filter pumps with different thread or those without a thread on the connection.
-
Page 8: Salt & Pool Water Volumes
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A SALT & POOL WATER VOLUMES • Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt). -
Page 9: Intex Pools Salt Table
Easy Set & Oval Pool) 3.0g/L (3000ppm) (CODE “91”) (Gals) (Liters) (Lbs) (Kgs) (Lbs) (Kgs) INTEX ABOVE GROUND POOLS (AGP’s) 15' x 33" (457cm x 84cm) 2587 9792 15' x 36" (457cm x 91cm) 2822 10681 15' x 42" (457cm x 107cm) 3284 12430 15' x 48"... -
Page 10: Intex Pools Cyanuric Acid Table
English 328A INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. To maintain the pool water clear and clean, and to maximize the performance of the device, add cyanuric acid to the pool. -
Page 11: Intex Pools Operating Time Table
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A INTEX POOLS OPERATING TIME TABLE (WITH CYANURIC ACID) Operating Time (hours) Intex Filter Water Capacity (Calculated at at different ambient/air 90% for Frame Pool and 80% pump for Easy Set &... -
Page 12: Non-Intex Pools Salt Table
10000 1.13 37500 1.37 12000 45500 1.59 14000 53000 OPERATING TIME TABLE FOR COMMON NON-INTEX POOLS (WITH CYANURIC ACID) Operating Time (hours) Water Capacity at different ambient/air temperatures 10 - 19°C 20 - 28°C 29 - 36°C (Gals) (Liters) (50 - 66°F) (68 - 82°F) -
Page 13: Operating Instructions
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A OPERATION INSTRUCTIONS IMPORTANT: To maximize the ozone output of the system, select a daily start time, usually after 10:00am, when humidity is the lowest. 1. - Page 14 For example, the boost operating time is 16 hours, the filter pump should be set to run for 17 hours at least. Increase the filter pump operating time if necessary. Note: If an Intex filter pump is attached to the system, set the pump switch to on “I” position.
-
Page 15: Led Code Chart
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A LED CODE CHART LED Reading Definitions Boost Mode Stand-By Mode (Start-up) Minimum Operating Hour (1 hour remaining) Operating Hours (2 hours remaining) Operating Hours (3 hours remaining) Operating Hours (4 hours remaining) Operating Hours (5 hours remaining) -
Page 16: Stationary Mounting
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A STATIONARY MOUNTING Some countries, especially in the European community, require the product to be secured to the ground or to a base in a permanent upright position. Check with your local authorities to determine if there is a regulation in your area regarding above-the-ground swimming pool filter pumps. -
Page 17: Maintenance
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A MAINTENANCE Flow Sensor Cleaning 1. In a counter-clockwise motion unscrew the collar of the flow sensor (7) and remove it from the electrolytic cell conduit. See “Part Reference”. 2. - Page 18 (328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A MAINTENANCE (continued) 4. Unscrew the collar of the flow sensor (7) and pull out the flow sensor from the electrolytic cell (9) housing. 5.
-
Page 19: Long Term Storage
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A MAINTENANCE (continued) INTEX TEST STRIPS (PACKED WITH THE PRODUCT) ® The Test Strips can test the “Free Chlorine”, “pH”, “Calcium Hardness” and “Total Alkalinity”... -
Page 20: Pool Maintenance And Chemical Definitions
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Maximum Free Chlorine 0.5 - 3.0 ppm 5.0 ppm Combined Chlorine 0 ppm 0.2 ppm 7.4 - 7.6... -
Page 21: Troubleshooting Guide
• Ensure that the cell cord is plugged firmly into the cell housing receptacle. 4. Possible electrolytic cell failure. • Contact Intex Service Center. Replace the cell if needed. 1. High salt level. • Partially drain the pool and refill it with fresh water. - Page 22 • Find out the switch and turn on. • RCD/GFCI has not reseted. • Reset the RCD/GFCI. • A power fuse has blown. • Contact Intex Service Center. • LED failure. IMPORTANT If you continue to experience difficulty, please contact our Consumer Service Department for assistance.
-
Page 23: Control Station Replacement
(328IO) MODEL ZS6220 & ZS6230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 07/14/2017 English 328A CONTROL STATION REPLACEMENT Tools required: One (1) Phillips screwdriver. If only the control station (10) needs to be replaced as instructed by the service center, remove all the components inside the dotted frame and keep them in a safe place for later use. -
Page 24: Limited Warranty
Other than this warranty, and other legal rights in your country, no further warranties are implied. To the extent possibly in your country, in no event shall Intex be liable to you or any third party for direct or consequential damages arising out of the use of your Krystal Clear Ozone &...
Need help?
Do you have a question about the L ZS6220 and is the answer not in the manual?
Questions and answers