Epson Brightlink 695Wi+ Installation Manual page 35

7. Attach the two markers to the positions shown on the projected screen (
Match the positions so that the crosses (
( ) ( ). Move the marker over the projected cross until the lines of the cross align with the lines on
the marker.
When circles with the same color (blue and green) as the marker positions are displayed on the left
and right of the projection screen, attach the markers to the projection screen as follows:
•
For magnetic screens: Place the bottom of the markers onto the screen.
•
For non-magnetic screens: Use the supplied tape to secure the markers. Make sure that both ends of
the markers are flush with the screen.
Do not place anything other than the markers near the projected image during angle
adjustment. If other objects are on the projected image, angle adjustment may not be
performed correctly.
Blue marker
position
) overlap with the points (
Correct position
34
) (
Green marker
position
) on the marker positions
Incorrect position
).