Controlling The Status Flag - Avocent DSR1020 Installer/User Manual

24 DSR Switch Installer/User Guide

Controlling the status flag

The status flag displays on your desktop and shows the name or EID number of the selected target
device or the status of the selected port. Use the Flag dialog box to configure the flag to display by
target device name or EID number, or to change the flag color, opacity, display time and location
on the desktop.
Table 3.4: OSCAR Interface Status Flags
Flag
To access the OSCAR interface Flag dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Flag. The Flag dialog box appears.
Figure 3.8: Flag Dialog Box
Description
Flag type by name
Flag type by EID number
Flag indicating that the user has been disconnected from all systems
Flag indicating that Broadcast mode is enabled
. The Main dialog box will appear.
Print Screen