ID Settings
MENU m →
System
→
ID Settings
→ ENTER E
ID Settings
Device ID
PC Connection Cable
RS232C Cable
" The displayed image may differ depending on the model.
Change PIN
MENU m →
System
→
Change PIN
→ ENTER E
System
Change PIN
" The displayed image may differ depending on the model.
Device ID
Set a unique ID number of each product. (Range: 0~224)
" Press u/d to select a number, and press E.
" Enter the number you want using the number buttons on the remote control.
PC Connection Cable
0
Select the type of cable to connect display with PC.
•
RS232C Cable
Communicate with MDC via the RS232C-stereo cable.
•
RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
Change your 4-digit Personal Identification Number (PIN).
Choose any 4 digits for your PIN and enter it in
The product has memorised your new PIN.
" Default password: 0 - 0 - 0 - 0
Enter a new
PIN.. Reenter the same 4 digits in
Enter the PIN
again..
79