Pioneer PRO-141FD Service Manual page 141

5
[4] REMOTE CONTROL CODE IN SERVICE FACTORY MODE
Key functions of the remote control unit on the FACTORY MENU are shown in the table below.
For details on key functions of the remote control unit in PANEL FACTORY, see "Remote Control Codes in Panel Factory
Mode" in "6.2[2] PANEL FACTORY (+)."
Remote Control Keys
i (UP)
For moving the cursor
j (DOWN)
For moving the cursor
For moving the cursor, decreasing the set value, or
k (LEFT)
changing the setting
For moving the cursor, increasing the set value, or
l (RIGHT)
changing the setting
INPUT For selecting the inputs (The inputs change cyclically.)
INPUT 1 to 8 For selecting the inputs
P/CH+ For changing pages
P/CH- For changing pages
DRIVE OFF (Note1) For turning the panel drive off
POWER ON/OFF For turning the power off
FACTORY (Note 2) For turning the Factory menu on or off
Note 1: If you wish to turn the unit on with the drive off, press the DRIVE OFF key then within 10 seconds press the POWER ON/OFF key.
If the unit is left unoperated 10 seconds or more after the DRIVE OFF key is pressed in Standby mode, the Drive Off command will
become invalid.
Note 2: Upon opening of the Factory menu, Page 11 is displayed.
5
6
Main function
PDP service
remote control
PRO-141FD
6
7
Remarks
To move the cursor to upper items
To move the cursor to lower items
To decrease an adjustment value or change the setting of
a selected item
To increase an adjustment value or change the setting of a
selected item
To change the inputs cyclically
To directly select an input (1-8). INPUT 7 and INPUT 8 are
available only for the Elite models.
To move to the next page
To move to the previous page
To turn the drive off
To turn the power off
To turn the Factory menu on or off
Supplied
remote control
7
8
A
B
C
D
E
F
141
8