Pioneer PRO-141FD Service Manual page 135

5
2. Protocol
[ IP Setting ]
Item
LAN
TCP/UDP
DHCP
IP Address
Sub net musk
Default gateway
MAC address
[ Protocol ]
From the PC to the display
(1) Sending one command at a time:
ID (2 byte) COMMAND (3 byte to 6 byte)
(2) Sending numerical direct commands:
ID (2 byte) COMMAND (3 byte)
ID, COMMAND, ARGUMENT are transmitted as ASCII characters.
From the display to a PC
(1) Echo back (Normal response)
Command received and returned but the ID is not returned.
COMMAND (3 byte)
Received command is a numerical direct effect command and numerical data is returned:
COMMAND (3 byte)
(2) Error (Abnormal response)
Received command is a non-corresponding command, "ERR" is returned:
ERR (3 byte)
Received command cannot be processed (when PON is received when the power is already ON, etc.), "XXX" is returned:
XXX (3 byte)
[ Debug mode ]
Send "OSR" commands via IP or RS-232C, then command line that PDP receive is display on screen.
5
6
Setting
10base-T/100base-TX
TCP/UDP
ON (default)
192.168.123.2 (When DHCP setting is off)
255.255.255.0 (default)
192.168.1.254 (default)
–
ARGUMENT (3 byte)
ARGUMENT (3 byte)
PRO-141FD
6
7
Remarks
Selectable on GUI menu
Selectable on GUI menu
Selectable on GUI menu
Selectable on GUI menu
Confirmable MAC address on GUI menu.
* GUI menu: IP Control Setting
7
8
A
B
C
D
E
F
135
8