Trango brodband TrangoLINK-10 User Manual page 25

Command Set Summary
<new gateway>
re ping
re reboot
re speedtest [<pkt len> <file size>]
re sysinfo
re testrflink [<pkt len>]
reboot
remarks [<str>]
reset [all | <n1> <n2> ..]
rfrxth <ism|unii> <-90|-85|-80|-75|-70|-
65>*
rfrxthreshold ...
rssi
save
save mm
save ss
set defaultopmode [on|off]
set httpport [<port #>]
set mir [<downstream,kbps>
<upstream,kbps>]
set rssitarget <dB>
Trango Broadband Wireless — User Manual TrangoLINK Rev. A for F/W Ver. 1.0
ping Remote Radio
reboot Remote Radio
perform speedtest
<pkt len> = 64..1760 bytes
<file size> = 10..100 Mbytes
request Remote's system information
perform RF loopback test testrflink
<pkt len> = 64..1760 bytes
reboot unit
string length should be 1 to 28 characters
reset radio to be firmware default
n# = 0..2
Master:
0 - Channel Table, Active Channel = 1 h,
Switches and Remarks
1 - Tx Power = Max, RF Threshold = -90 dBm,
Target RSSI = -60 dBm, MIR Downstream =
10000 kbps, Upstream = 10000 kbps
2 - SNMP Community String (Read/Write) =
(public/private)
Remote:
0 - Channel Table, Active Channel = 1 h,
Switches, and Remarks
1 - Tx Power = Max, RF Threshold = -90 dBm
2 - SNMP Community String (Read/Write) =
(public/private)
specify RF rx threshold
same as "rfrxth"
display current Rx rssi
same as "updateflash"
same as "updateflash mainimage"
same as "updateflash systemsetting"
set or display default opmode
set or display HTTPD port number
set or display MIR
<kps> = 100..10000
set Target RSSI threshold
SNMP
se M
se M
se M default:
<pkt len> = 1760 bytes
<file size> = 10 MBytes
se M
se M defaukt:
<pkt len> = 1760 bytes
se se
se se not 31 characters
se
se se default = -90 for both band
se
se se
se se
se se
se se
se se default = 80
se se M
se se M
Page 22