Advertisement
•
High-Definition Compatible Digital. (HDCD) decoding.
•
Dolby Digital Class A and HDCD certified.
•
CD-DA.
•
MP3.
1.2 M
EMORY
1.2.1
System SRAM Interface
The system SRAM interface controls access to optional external SRAM, which can be
used for RISC code, stack, and data. The SRAM bus supports four independent address spaces,
each having programmable bus width and wait states. The interface can support not only SRAM,
ROM/EPROM and memory-mapped I/O ports for standalone applications are also supported.
1.2.2
DRAM Memory Interface
The Vibratto provides a glueless 16-bit interface to DRAM memory devices used as video
memory for a DVD player. The maximum amount of memory supported is 16 MB of Synchronous
DRAM (SDRAM). The memory interface is configurable in depth to support 128-Mb addressing.
The memory interface controls access to both external SDRAM or EDO memories, which can be
the sole unified external read/write memory acting as program and data memory as well as
various decoding and display buffers.
1.3 D
I
RIVE
NTERFACES
The Vibratto supports the AT Attachment Packet Interface (ATAPI), Integrated Drive
Electronics (IDE), and other parallel and serial port interfaces used by many types of DVD
loaders. These interfaces meet the specifications of many DVD loader manufacturers. An ATAPI
drive is connected via the standard 34 pin dual row PC style IDE header
1.4 F
P
RONT
ANEL
The front panel is based around an Futaba VFD and a common NEC front panel
controller chip, (uPD16311). The ES6008/ES6018 controls the uPD16311 using several control
signals, (clock, data, chip select). The infrared remote control signal is passed directly to the
ES60X8 and 8051 for decoding.
1.5 R
P
EAR
ANEL
Outputs and Inputs at the AV1000 rear panel:
Left, Right and Subwoofer (active) audio outputs.
-
Left, Right and CVBS input.
-
-
Composite, S-Video, and SCART outputs.
-
Input SCART
5x15W 8ohms (L,R,SL,SR,C) + 1x25W 4ohms Subwoofer outputs.
-
AM / FM Tuner Antenna input
-
220-240 V 50Hz AC Power input
-
The six-video signals used to provide CVBS, S-Video, and RGB are generated by the ES60X8's
internal video DAC. The video signals are buffered by external circuitry.
Six channel audio output by the ES6018 in the form of three I
S/PDIF serial stream is also generated by the ES60X8 output by the rear panel. A six channel
audio DAC (AK4356) are used for six channel audio output with ES6018, and similarly one
AK4362A Audio DAC is used for two channel audio output with ES6008 or ES6018.
2
S (or similar) data streams. The
3
Advertisement
