Advertisement

Quick Links

SOHORAID
ST4-TB3
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SOHORAID ST4-TB3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Stardom SOHORAID ST4-TB3

  • Page 1 SOHORAID ST4-TB3 User Manual...
  • Page 2: Table Of Contents

    SOHORAID ST4-TB3 User Manual » ST4-TB3 User Manual ..........1 1. Environmental Requirements ..........1 2. Product Appearance and Packaging Content ....1 3. Hardware Requirements and Precautions ......2 4. Hardware Installation ............3 5. The MSU, and easy RAID configurator ......4 6. Description of HDD Indicators ...........10 7.
  • Page 3: St4-Tb3 User Manual

    No separate notifications will be provided by our company. If you would like to receive the latest STARDOM product information, manuals, and firmware, or have any questions regarding STARDOM products, please contact your local supplier or visit www.STARDOM.
  • Page 4: Hardware Requirements And Precautions

    ST4-TB3 on a regular basis or whenever the user feels necessary to a remote or a separate storage device. STARDOM will not be responsible for any lost of data caused during the use of the ST4-TB3 or the recovery of the data lost.
  • Page 5: Hardware Installation

    SOHORAID ST4-TB3 User Manual 4. Hardware Installation Please follow the steps below to complete the hardware installation process: Step 1 When you open the package, please immediately check the product and included parts for any damage or missing parts. If there is a problem with the product or included parts please contact your supplier immediately.
  • Page 6: The Msu, And Easy Raid Configurator

    SOHORAID ST4-TB3 User Manual 5. The MSU, and easy RAID configurator • JBOD: To use individual capacity of each installed HDD. • RAID-0: Only enhances the performance of data accessing, it does not provide backup/fail-safe for stored data. A. Set up RAID Mode: 1.
  • Page 7 SOHORAID ST4-TB3 User Manual 3. Click at the selected HDDs. 4. Select【RAID 0】. 5. Setup Stripe Size. • The more Stripe Sizes helps a better data transfer for large data files which is good for video and audio editing works.
  • Page 8 SOHORAID ST4-TB3 User Manual 6. Type Storage Name and Submit RAID setting. 7. After submitting RAID setting: 8. Click 【Create VD】, 【Initialize】 option is set to 【No Initialization】; 【Gigabyte Rounding】 options set to 【10G】, then click 【Submit】.
  • Page 9 SOHORAID ST4-TB3 User Manual 9. After submit, you get a New_VD. P.S. VD is the abbreviation of Virture Disk. 10. To initiate and format HDD/SSD at OS level. 11. After completing the format, you couyld start using your ST4-TB3.
  • Page 10 SOHORAID ST4-TB3 User Manual B. Delete a RAID for a new RAID setting 1. Click 【Operation】 and 【Delete VD】. 2. Click 【OK】 at first warning message. 3. Click 【OK】 at the second warning message.
  • Page 11 5. Click 【OK】 at warning message. 6. It returns to JBOD mode, you just have to format every individual HDD or just to set up another RAID. Please refer to “STARDOM All TB2&TB3 RAID 5 Storage MSU User Manual.pdf” for the RAID setting.
  • Page 12: Description Of Hdd Indicators

    SOHORAID ST4-TB3 User Manual 6. Description of HDD Indicators Status System indicator Light HDD Status Light No HDD Blue light always on HDD failed Blue light always on Data access Blue light always on Blue light flashing HDD idle Blue light always on Blue light always on 7.
  • Page 13: Frequently Asked Questions

    SOHORAID ST4-TB3 User Manual B. ST4-TB3: Let its TB A port connect to Host (PC/Workstation/Server), TB B port to a monitor, and mDP port to the second monitor. 8. Frequently Asked Questions 1. If the ST4-TB3 is turned on, but the Thunderbolt cable is not connected, the fan and power status lights will both be in stopped/hibernation mode.
  • Page 14: St4-Tb3 產品使用說明

    SOHORAID ST4-TB3 User Manual 關於這份手冊 感謝您使用 STARDOM 的產品。本手冊將介紹 STARDOM ST4-TB3 產品。在您開始使用 STARDOM ST4-TB3 產品前,建議您先閱讀過本手冊。手冊裡的資訊在出版前雖已被詳細確認,實際產品規格仍 將以出貨時為準;任何產品規格或相關資訊更新請您直接到 www.stardom.com.tw 網站查詢,本公司 將不另行通知。若您想獲得 STARDOM 最新產品訊息、使用手冊、韌體 , 或對 STARDOM 產品有任何 疑問,請您聯絡當地供應商或到 www.stardom.com.tw 取得相關訊息。 本手冊相關產品內容歸銳銨科技股份有限公司版權所有 1. 環境需求 工作溫度 : 5 ~ 35 ℃ (41 ~ 95 ℉ ) 儲存溫度...
  • Page 15: 硬體需求與注意事項

    SOHORAID ST4-TB3 User Manual 正面與背面示意圖 前視圖 背視圖 A. 硬碟狀態指示燈 E. 電源開關 I. 防竊鎖孔 B. 硬碟抽取盒把手 F. 電源插座 J. 風扇 C. 硬碟抽取盒鑰匙孔 G. Mini DisplayPort D. 電源指示燈 H. Thunderbolt 連接埠 3. 硬體需求與注意事項 1. 本系統同一時間只可透過一組介面與一台電腦執行資料傳輸。 2. 在安裝新硬碟到 ST4-TB3 之前,請先確認硬碟是沒有壞軌而且是沒有故障的,以避免資料受損。 3. 當您需要關閉或移除 ST4-TB3 時,務必透過您所操作的作業系統中執行硬碟安全移除後,方可進...
  • Page 16: 硬體安裝

    SOHORAID ST4-TB3 User Manual 4. 硬體安裝 請參照以下步驟完成硬體安裝 步驟 1 當你打開包裝後,首先請先檢查產品主體以及附件是不是有毀損或是短缺情形,如果發生產品 主體及附件短缺,請立刻與您的供應商聯絡。 步驟 2 將主機置放於平穩空間上,並確認散熱風扇沒有被擋住,且四周有適當的散熱空間。 ( 請避免 接近水源或是其他容易造成產品損傷的環境 ) 步驟 3 請使用零件包中所附的頂針插入鑰匙孔,開啟硬碟抽取盒把手便將抽取盒取出。 步驟 4 將硬碟安裝到抽取盒上,並以零件包內附的螺絲加以固定 , 以避免不必要的移動對硬碟造成傷 害。 注意:不建議使用不同廠牌,或是同廠牌不同型號的硬碟,避免影響效能。 步驟 5 硬碟安裝完成後,請將抽取盒平移放入主機內,並關上把手。 步驟 6 請依據您欲使用的介面,從附件包中選擇相對應的連接線,將 ST4-TB3 背面連接埠與電腦主 機相對應介面埠連接。 步驟 7 AC Power 電源線與 ST4-TB3 連接好,並將接頭接上電源插座後開機。...
  • Page 17: Msu 簡易設定

    SOHORAID ST4-TB3 User Manual 5. MSU 簡易設定 • JBOD:各別使用用置⼊入的硬碟存取空間。 • RAID-0:僅加速資料存取速度,對於資料備份不作任何保障。 ㄧ、建立 RAID 模式: 1. 開啟 MSU 程式進入登錄頁面, 使用 Windows 或 Mac 帳戶及密碼登錄進入 MSU。 若有帳戶卻無密碼, 請將 MSU 登錄密碼處維持空白。 2. 點擊【Operation】與【Create Array】。...
  • Page 18 SOHORAID ST4-TB3 User Manual 3. 點擊選擇硬碟。 4. 選擇【RAID 0】 5. 設定 Stripe Size 數值越大,大量傳輸資料的效能越好(如圖像編修、影音編輯等); 數值越小,隨機讀寫越快(如程式啟動、文書處理、系統頻繁讀寫等)。...
  • Page 19 SOHORAID ST4-TB3 User Manual 6. 輸入存儲名稱,再點擊【Submit】,提交 RAID 設置。 7. 提交 RAID 設置後的回饋如下: 8. 點擊【Create VD】,將【Initialize】的選項設定為【No Initialization】;將【Gigabyte Rounding】 的選項設定為【10G】,再點擊【Submit】。...
  • Page 20 SOHORAID ST4-TB3 User Manual 9. 提交後,您將獲得一個 New_VD。 P.S. VD 為虛擬磁碟 virtual disk 的簡稱 10. 於作業系統進行初始化硬碟的設定。 11. 格式化之後,即可開始使用。...
  • Page 21 SOHORAID ST4-TB3 User Manual 二、移除 RAID 模式: 1. 點擊【Operation】與【Delete VD】。 2. 在第一條警告消息中點擊【OK】。 3. 在第二條警告信息中點擊【OK】。...
  • Page 22 SOHORAID ST4-TB3 User Manual 4. 點擊【Operation】、【Delete Array】與【Submit】 5. 在警告信息中點擊【OK】。 6. 磁碟系統轉為 JBOD 模式,之後只需要個別格式化硬碟,或設置新的 RAID 模式。 更詳細的 RAID 設定方式請參閱 STARDOM All TB2&TB3 RAID 5 Storage MSU User Manual.pdf...
  • Page 23: 硬碟狀態指示燈號說明

    SOHORAID ST4-TB3 User Manual 6. 硬碟狀態指示燈號說明 狀態 電源指示燈 硬碟狀態燈 無硬碟 藍燈恆亮 硬碟故障 藍燈恆亮 資料存取 藍燈恆亮 藍燈閃爍 硬碟閒置 藍燈恆亮 藍燈恆亮 7. 與其他裝置連接說明 1. TB port : Thunderbolt 3 連接埠可串接 TB3,USB 3.1 和 DisplayPort 裝置;其中向下支援 USB3.0/ USB2.0,有轉接線即可連接不同規格之 USB 產品,本產品支援 TB port 供電功能 (PD),可以提供...
  • Page 24: 常見問題

    SOHORAID ST4-TB3 User Manual B. ST4-TB3: TB A port 接 MB (Host), TB B port 接螢幕 , mDP 接螢幕 ( 雙螢幕 ) 8. 常見問題 1. ST4-TB3 在開機情況下,未連接 Thunderbolt cable 時,風扇與電源指示燈皆為停止及休眠狀態, 直至連接 Thunderbolt cable 至電腦才會啟動風扇及電源指示燈。 2. 電腦進入睡眠模式時,ST4-TB3 的風扇與電源指示燈皆為停止及休眠狀態,直至喚醒時才會啟動風 扇及電源指示燈。 3. 若硬碟已在其他磁碟陣列產品存取資料或設定 RAID MODE 過,建議還原成 JBOD 模式後再應用...
  • Page 25 SOHORAID ST4-TB3 User Manual http://www.stardom.com.tw/...

Table of Contents