458 Universal Graphical User Interface - Telebyte 458-SM-2-16 Instruction Manual

Keypad Controls (458-SM-2-16)
1. Up Arrow: increase slot/channel number
2. Down Arrow: decrease slot/channel number
3. Left Arrow: decrease input signal number
4. Right Arrow: increase input signal number
5. C: Config switch used to access second menu for communications settings such as RS232
baud rates, GPIB addresses, etc.
Baud Rates: 19200, 9600, 4800, 2400, 1200, 600
GPIB Addresses: 1 – 30
 Please note the information in this section pertains to the 458-SM-2-16 only. If using a loop simulator in the same
chassis, the values shown for the slot containing the loop simulator will relate to selections appropriate for
product installed. For example, the right and left arrows will increase and decrease line lengths for slot 2 if a loop
simulator is installed in slot 2.
6.5

458 Universal Graphical User Interface

 Refer to the 458 Universal Graphical User Interface Reference Manual for more information.
Model 458-SM-2-16 Transparent Switching Module Page 14 of 14