Related Manuals for Telebyte 458-LM-E1-36-04
Summary of Contents for Telebyte 458-LM-E1-36-04
- Page 1 “Results You Can Count On” Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator Rev. - Date of Publication: 02/25/2019...
-
Page 2: Customer Support
Customer Support Thank you for your purchase of the Telebyte Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator. This one-channel product simulates PE04 as specified in ETSI TS 101 388. Contact Information: Telephone E-mail/Internet General: 631-423-3232 support@telebytebroadband.com Technical support: 800-835-3298 sales@telebytebroadband.com Fax: 631-385-8184 www.telebytebroadband.com... -
Page 3: Customer Care
TELEBYTE, INC. warrants its broadband simulation equipment to be free from defects in material and workmanship, under normal and proper use and in its unmodified condition, for 12-months, starting on the date it is delivered for use. TELEBYTE’S sole obligation under this warranty shall be to furnish parts and labor for the repair or replacement of products found by TELEBYTE to be defective in material or workmanship during the warranty period. -
Page 4: Equipment Returns
Equipment Returns Out of warranty equipment may be returned, prepaid, to the Hauppauge, N.Y. customer service facility. Return shipping charges will be billed to the customer. The repaired unit will have a 90-day warranty. In those cases where "no trouble" is found, a reduced charge will be billed to cover handling, testing, and packaging. - Page 5 Introduction The Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator is the ideal solution for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing. This single-pair loop simulator can simulate PE04 for ADSL, ADSL2, ADSL2+ and VDSL2 (including Profile 35b). This versatile local loop simulator is plugged into our Model 458-3SLB (3-Slot) or 458-CC-16 (16-Slot) chassis where settings are controlled by a convenient keypad located on the front, RS-232, Ethernet or IEEE-488(GPIB).
-
Page 6: Specifications
Storage: 0 to 95% relative humidity (non-condensing) Remote Control Connectors RS-232: DB9 female (DCE); GPIB:IEEE488 24-pin connector. Ethernet: RJ- Plug-In Compatibility Accepts one, two or three 458 Line Modules or one 458-RT Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator Page 2... - Page 7 ➢ Detailed information about the operation of the 458-3SLB and 458-CC-16/458-CM can be found in the reference manuals for those products. Only information specific to the 458-LM- E1-36-04 is provided in this manual. Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator Page 3...
- Page 8 Control The Model 458-LM-E1-36-04 can be controlled three ways: via RS-232 and IEEE488 Remote Commands, our 458 Universal GUI interface or the push buttons and LCD Display on the front panel of our 458-3SLx or 458-CM. Remote Commands Please refer to the manuals for the 458-3SLB or 458-CC-16/458-CM for remote commands common to many line modules, including the 458-LM-E1-36-04.
- Page 9 The length will increment in 10-m steps. Step Three – Select Noise Levels • Use the UP arrow button to select the CO or CPE noise. • Adjust the noise level using the LEFT and RIGHT arrow buttons. Model 458-LM-E1-36-04 Multi-Standard Local Loop Simulator Page 5...