FALCOM DISCO-B4 Hardware Manual page 3

DISCO-B4 H
ARDWARE
6.3 Mounting.................................................................................................................29
6.4 Audio jacks.............................................................................................................30
6.4.1.1 Audio Interface ..................................................................................................................... 31
7 H .....................................................................................32
OUSING
8 A ....................................................................................33
PPENDIX
8.1 Schematics.............................................................................................................33
8.1.1 Installation guidance for 8-pin connector............................................................33
8.2 Setting up DISCO-B4-EVALKIT.............................................................................34
8.3 What should be considered when using the DISCO-B4 device........................35
Version history:
This table provides a summary of the document revisions.
Version
Author Changes
1.0.3 F. Beqiri - Changed device name from FOX-LT-IP to DISCO-B4
1.0.2 F. Beqiri - Added the maximum and recommended tightening torque values used on the Torx
screws. Reed point 7 in chapter 6.2.
1.0.1 F. Beqiri - Updates and corrections made throughout the document.
1.0.0 F. Beqiri - Initial version.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
M
ANUAL
V 1.0.3
ERSION
Modified
15/09/2011
01/09/2010
04/01/2010
11/11/2009
Page 3 of 35