Table of Contents
Advertisement
Chapter 3 Setup
Category
Set the XHCI mode to
Boot
[Disabled] according to your
OS.
After loading BIOS Setting to
default value (perform "Load
Setup Defaults" in BIOS
SETUP Utility), set "Disabled"
as a XHCI mode.
Change the boot order of
devices
Set a password
Security
Restrict bootup by entering
password
UPS
When the server is supplied
Power link
with power from UPS, always
turn on the power.
If the server is turned off by
using POWER switch, leave it
OFF even when UPS supplies
power.
Keep the power OFF even
when UPS supplies power.
*1. The factory setting is preset to the proper setting.
Express5800/R310e-E4, R320e-E4, R320e-M4, R310f-E4, R320f-E4, R320f-M4 User's Guide
72
Description
Advanced USB Configuration
XHCI Mode Disabled *1
Applied OS:
－ Windows Server 2008 R2
Boot Boot Option Priorities
Change the boot priority
Security Administrator Password
Set a password
Security User Password Set a
password
Security Password on Boot
Enabled
Server Power Control Configuration
AC-LINK Power ON
Server Power Control Configuration
AC-LINK Last State
Server Power Control Configuration
AC-LINK Stay off
2. BIOS Setup Utility (SETUP)
To be changed
Remark
When you use
EXPRESSBUILDER, set
the highest priority to
CD/DVD.
If password is set, a
message requesting
password is displayed at the
next SETUP execution.
Can be selected when
password is set.
Advertisement
Table of Contents
