Philips HD5730 User Manual page 13

Hide thumbs Also See for HD5730:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Open the lid of the ground coffee container and put one level
measuring spoon of ground coffee in the funnel.
5
Brew 1 cup of coffee as described in 'Brewing espresso from coffee
beans'.
When you use ground coffee, you cannot brew  cups at the same time.
6
If you want to make coffee from beans instead of ground coffee again,
press the coffee strength/ground coffee button and select the desired
coffee strength with the ^ or % button.

Press the OK button to confirm the desired coffee strength.
Changing the coffee quantity for espresso
The appliance is preset to brew the following coffee quantities:
-
short coffee: 40ml
-
standard coffee: 80ml
-
long coffee: 120ml
To change the standard quantities, proceed as follows:
1
Put a cup under the coffee spout.

Press the button for short coffee, standard coffee or long coffee,
depending on which quantity you want to change. Press this
button for 5 seconds UNTIL the message 'PROGRAM TO SET VOL...'
appears on the display and then release it.
The appliance starts to brew coffee.
,

When the coffee in the cup reaches the required level, press the
same button again to set the new quantity.
'SETTING DONE!' appears on the display. The appliance now brews
,
the set quantity until you change it again.
Brewing cappuccino or latte macchiato
1
Move the release slide towards you and remove the lid of the milk
jug.

Fill the milk jug with approx. 150ml milk for each cappuccino or latte
macchiato to be prepared.
-
It is advisable to use fresh skimmed or fresh semi-skimmed milk at
refrigerator temperature (about 5°C).

Make sure the milk intake tube is properly inserted into the rubber
ring.
EnglisH
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents