Uponor Smatrix Move PRO Installation And Operation Manual page 87

DHW Circ Return Settings
This menu enables access to settings related to the
return temperature sensor.
This menu is only shown if Zone Setup is set to
Domestic Hot Water for the zone.
MENU TREE
DHW Circ Return Settings
DHW Circ Return Setpoint
BoostPower
DHW CIRC RETURN SETPOINT
In this menu the return temperature setpoint for the
zone is set.
To set the return temperature setpoint:
1. Select DHW Circ Return Setpoint.
2. Press the navigation wheel to confirm selection.
3. Set the value.
Default: 50.0 ˚C
Setting range: 50.0 – 250.0 ˚C, 0.1 ˚C increments
4. Confirm the new setting by pressing the navigation
wheel again.
BOOSTPOWER
In this menu the boost power for domestic hot water
production is set. The parameter is used to adjust
the calculated supply temperature, if the difference
between the supply and return temperatures is to large.
This menu is only shown if Zone Setup is set to
Domestic Hot Water for the zone.
To set the boost power:
1. Select BoostPower.
2. Press the navigation wheel to confirm selection.
3. Set the value.
Default: 60 %
Setting range: 0 – 100 %, 1 % increments
4. Confirm the new setting by pressing the navigation
wheel again.
U P O N O R S M AT R I X M O V E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
Comf. - ECO
This menu enables access to settings related to the
controller Comfort/ECO modes.
This menu and its submenus are only shown if Zone
Setup is set to Stand Alone Control and if Heating
Mode is set to Outdoor + Indoor comp. for the zone.
MENU TREE
Comf. - ECO
ECO Setback
ECO-Comf Status
ECO-Comf Schedule
ECO SETBACK
In this menu the ECO setback temperature is set. The
parameter reduces the current setpoint with the set
value.
If the setback is set to 0 the zone will resume its normal
operation, even if it is set in ECO mode.
To set the ECO setback value:
1. Select ECO Setback.
2. Press the navigation wheel to confirm selection.
3. Set the value.
Default: 4.0 ˚C
Setting range: 0.0 – 10.0 ˚C, 0.1 ˚C increments
4. Confirm the new setting by pressing the navigation
wheel again.
ECO-COMF STATUS
This menu shows if the zone is set in ECO or Comf
(comfort) mode.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
8 7