Before Operation; Before Operation Safety; Fuel Safety - Toro 74784 Operator's Manual

Key Choice ® Switch
This switch allows you to mow in reverse when it
is activated. To activate it, turn the switch to the O
position and release it after the PTO is engaged. To
deactivate it, disengage the power takeoff (PTO)
(Figure 6).
Operating-in-Reverse Warning
Light
The Operating-in-Reverse warning light illuminates
whenever you use the Key Choice key to deactivate
the operating-in-reverse interlock. It is a reminder that
the interlock system is deactivated. The light goes
out whenever you disengage the PTO or shut off the
engine. When the light is on, look behind you and use
extra caution when backing up.
Smart Park ™ Switch
The parking brake is activated electronically.
Engage the parking brake by 1 of the following actions:
•
Pressing the Smart Park
(Figure 5).
•
The parking brake engages automatically when
you leave the seat and the traction control pedal is
in the position.
NEUTRAL
•
The parking brake automatically engages 5 to 6
seconds after the ignition switch is turned to the
position (if it is not already engaged).
OFF
To disengage the parking brake, press the Smart Park
switch to the position with the key in the
OFF
position.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
™ switch to the position
ON
RUN
Operation
Note:
Determine the left and right sides of the
N
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
Replace worn or damaged blades and bolts in sets
to preserve balance.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
Evaluate the terrain to determine the appropriate
equipment and any attachments or accessories
required to operate the machine properly and
safely.

Fuel Safety

•
To avoid personal injury or property damage, use
extreme care in handling fuel. Fuel vapors are
flammable and explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or add fuel to the fuel
tank while the engine is running or while hot.
•
Do not refuel the machine indoors.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or on other appliances.
•
Do not fill containers inside a vehicle or on a truck
or trailer bed with a plastic liner. Always place
12